How to use steel cable seals?

Industry News, 10-20-2022

1. Select a suitable place, check whether the keyhole of the cable seal strip in the lock cylinder is blocked and rusted, and then check whether the plastic head is severely deformed and cannot be used.

2. After the inspection is completed, the cable seal can be inserted. When inserting, it should be noted that through the keyhole, the fingers can feel the obvious locking force of the steel ball and make a clear sound. It should be noted that if there is no obvious steel ball buckle force and sound when the cable passes through, it means that there is corrosion or steel ball displacement inside the cable seal, which will be a useless cable seal.

3. After the cable is hollowed out, pay attention to the length of the hollowed insertion. This length cannot be long or short. If the hollowed length is too long in the past, it will be troublesome to break the cable seal later. If the distance of the cable passing through is too short, it will be impossible to ensure whether the cable seal can effectively lock the cable. Therefore, neither of them is necessary. After the cable seal is used, it can only be cut with wire cutters.

The cable seal strip comprises a body and a cable. The body is provided with a clamping hole and a through hole for the cable to pass through. One end of the cable is clamped in the clamping hole and the other end passes through the through hole. The cable seal strip is characterized in that the body is hexagonal prism shaped, and the side is provided with an anti-skid bulge. The main body of the cable seal strip of the utility model is provided with an anti-skid bulge, which is more convenient to use. It can be used in some higher positions or places that are not easy to lock, which can effectively prevent sliding, The original cable seal can pull back the cable of the cable seal by high-speed rotation, and insert it again after it is broken. If the utility model wants to open the cable seal, it can only open the cable seal by breaking or cutting the cable. The seal of the cable seal is designed as a loose cable rope with special treatment, which will automatically disperse after locking. Once the cable is pulled out, it cannot be inserted back, ensuring the safety of use.

SHARE CONTENT